Disclaimer

Disclaimer

Last Updated: October 2026

The information provided by Asan Crown (“we,” “us,” or “our”) on https://www.asancrown.com/ (the “Site”) is for general educational, technical informational, and diagnostic purposes only. All information on the Site is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of any technical information, error code solutions, or parameter settings on the Site.

1. High-Voltage Electrical Safety & Risk Warning

Solar power installations, hybrid inverters, battery storage banks, and alternating current (AC) / direct current (DC) distribution systems operate at dangerously high voltages and currents. Working on or inspecting high-voltage power electronics carries inherent risks of:

  • Severe electrical shock and electrocution

  • Arc-flash explosions and thermal burns

  • Permanent equipment damage or fire hazards

  • Total battery pack short-circuiting

Under no circumstances should any user attempt hazardous electrical work, open high-voltage inverter casings, or bypass safety circuit breakers without proper training, certified personal protective equipment (PPE), and proper electrical isolation protocols.

2. Professional Electrical Advice Disclaimer

The technical walkthroughs, pinout charts, firmware configuration numbers, and troubleshooting steps published on Asan Crown do not constitute formal engineering or professional electrical installation advice.

The content is meant to serve as an informational field reference. Before executing any complex wiring adjustments, high-voltage battery terminations, or warranty-sensitive repairs, you should always consult with a certified professional solar installer, licensed electrician, or an authorized service representative of your equipment manufacturer.

Any reliance you place on the technical materials found on this Site is strictly at your own risk. Asan Crown shall not be held liable for any personal injury, loss of life, property damage, equipment destruction, or voided manufacturer warranties resulting directly or indirectly from following any guide, diagram, or parameter setup published on this Site.

3. Brand & Trademark Disclaimer

All product names, logos, trademarks, and registered trademarks mentioned on this website (including, but not limited to, Inverex, Fronus, Knox, Crown Micro, Voltronic, Deye, Pylontech, and others) are the property of their respective owners.

The use of these company names, model names, and error codes on Asan Crown is strictly for identification, diagnostic, and educational reference purposes only. Asan Crown is an independent informational platform and is not affiliated with, endorsed by, sponsored by, or associated with any inverter or battery manufacturing brand.

4. External Links Disclaimer

The Site may contain links to external third-party websites or technical standards documentation (such as IEEE, IEC, or NEC regulatory standards). Such external links are not investigated, monitored, or checked for accuracy, adequacy, validity, reliability, or completeness by us. We do not warrant, endorse, guarantee, or assume responsibility for any information offered by third-party websites linked through our Site.

5. Contact Us

If you have any questions or require further clarification regarding this Disclaimer, please feel free to reach out to us: